Temple Custom Cabinets
Cabinet Refacing And Refinishing in Temple, TX
Cabinet refacing and refinishing in Temple, TX. Update doors, boxes, and finish without a full tear-out. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Temple and nearby communities.
If your cabinet boxes are still square and solid but the doors are dated, chipped, or just the wrong color, tearing everything out and starting over wastes money. Cabinet refacing and refinishing keeps your existing boxes and gives you new doors, veneer, and finish. Temple Custom Cabinets inspects what you have first and tells you straight whether refacing will work or whether the boxes have had enough.
This is the most common budget-conscious call we get from owners of older Temple homes where the layout still works fine, but the oak tone or laminate finish from the 90s doesn't.
What's included
What's Included with Cabinet Refacing And Refinishing
Typically included: Inspection of existing boxes, new door and drawer front install, veneer application to exposed box surfaces, new stain or paint finish, updated hardware.
Optional: Soft-close hinge upgrades, interior shelf replacement, crown molding addition.
Customer prep: Clear cabinet contents before work starts, confirm door style and finish selection ahead of the job.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Cabinet Refacing And Refinishing Process Works
Step 1Initial Inspection
We assess existing cabinets to determine refacing or refinishing needs.
Step 2Surface Preparation
Cabinet surfaces are cleaned and prepped for new materials.
Step 3Door Replacement
New doors are fitted to update the cabinet's appearance.
Step 4Veneer Application
Veneer is applied to cabinet boxes for a refreshed look.
Step 5Finish Coating
A new finish is applied to match the updated cabinet style.
Step 6Final Detailing
Hardware and trim are adjusted for a polished final result.
Materials
Materials and Methods for Cabinet Refacing And Refinishing
Refacing lives or dies on how well the new surface bonds to what's already there, especially through Central Texas humidity swings. We pick materials with that in mind.
Veneer Sheets
Thin wood layers used to refresh existing cabinet surfaces without replacing the box underneath.
Replacement Cabinet Doors
New doors designed to modernize the cabinet's appearance while keeping your current layout.
Wood Fillers
Material used to repair minor imperfections in the box before refinishing begins.
Stain Finishes
Stains applied to achieve a renewed wood tone that holds up through seasonal humidity changes.
Hardware Upgrades
Updated handles and knobs chosen to complete the new look.
Protective Topcoat
A sealant applied to protect the refinished surface from daily wear and moisture.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Cabinet Refacing And Refinishing Take?
Most refacing jobs move faster than a full replacement since the boxes stay put.
- 01
Consult and inspection
same day - 02
Door and veneer order
1–2 weeks - 03
On-site refacing work
2–4 days - 04
Final finish cure
1–2 days
Need a schedule that fits?
Get a Free EstimateCost
What Does a Cabinet Refacing And Refinishing Cost in Temple, TX?
Cost depends on how many cabinet boxes you're refacing, door material, and finish grade (stain vs paint-grade veneer). Every estimate is written and tied to your actual cabinet count, not a flat per-kitchen rate. Call for a free estimate before you decide between refacing and full replacement.
| Project type | Typical range | What’s included |
|---|---|---|
| Partial kitchen refacing | $2,500-$6,000, | doors and veneer on one section or wall. |
| Full kitchen refacing | $6,000-$12,000, | all boxes and doors refinished. |
| Refinishing only (no new doors) | $1,800-$4,000, | strip and refinish existing doors and boxes. |
| Hardware and accent upgrades | $300-$900, | added to any refacing package. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing And Refinishing
Permit requirements can vary by scope. Verify specifics with Bell County or the City of Temple before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| Any plumbing relocation if sink or faucet position changes during the job | Door and drawer front replacement on existing boxes |
| Electrical work if under-cabinet lighting is added as part of the upgrade | Veneer application and refinishing |
| — | Hardware swaps |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing And Refinishing
| DIY | Hire a pro |
|---|---|
| Swapping hardware (knobs, pulls) is a reasonable weekend project | Veneer application requires even adhesion and trimming to avoid peeling edges |
| Minor touch-up staining on small areas | Matching new door finish to existing box stain takes experience to avoid a mismatched two-tone kitchen |
| — | Full refacing across a whole kitchen benefits from consistent spray-finish equipment |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Cabinet Refacing And Refinishing
Call Temple Custom Cabinets for a free estimate and we'll tell you honestly if refacing is the right call for your kitchen.
- Your cabinet boxes are solid but the doors look dated or damaged
- You want a different color or finish without a full remodel budget
- Hardware feels loose or dated but the layout still works for your household
Seeing warning signs?
Get a Free EstimateFAQs
Cabinet Refacing And Refinishing FAQs
What's the difference between cabinet refacing and full replacement?
Refacing keeps your existing cabinet boxes and replaces doors, drawer fronts, and exposed surfaces. Full replacement tears out everything and builds new boxes. Refacing works when the boxes are structurally sound; replacement is needed when boxes are warped, water-damaged, or the layout needs to change.
How much does cabinet refacing cost in Temple, TX?
Most refacing jobs run $2,500 to $12,000 depending on kitchen size and whether you're doing a partial section or the whole kitchen. Refinishing without new doors runs lower, roughly $1,800 to $4,000.
Is refacing cheaper than buying new cabinets?
Generally yes. Refacing avoids the cost of new boxes, which is often the biggest line item in a cabinet job. It's a good fit when your current layout and box condition are fine.
How long does refacing take?
Most refacing projects take 2-4 days on-site, with 1-2 weeks lead time for door and veneer ordering before work starts.
Is DIY cabinet refacing a good idea?
Hardware swaps and small touch-ups are fine for a confident DIYer. Full veneer application and finish matching take practice to avoid visible seams or uneven color, so most homeowners hire a pro for whole-kitchen jobs.
Do I need a permit for cabinet refacing?
Usually not, since the boxes stay in place. A permit may apply if you're relocating plumbing or adding new electrical for lighting during the same job.
Can refacing fix water-damaged cabinet boxes?
No. If the boxes have swelling, delamination, or structural damage, refacing won't hold up. We'll tell you during the inspection if full replacement makes more sense.
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Custom kitchen cabinets in Temple, TX, built to your room's real dimensions with hardwood boxes and soft-close hardware. Free estimates.
Custom Kitchen Remodels
Full custom kitchen remodels in Temple, TX, with layout changes, new cabinetry, and countertop coordination. Free estimates.
Built-In Shelving And Wall Units
Custom built-in shelving and wall units in Temple, TX, fitted to odd walls and alcoves with solid wood construction. Free estimates.
Ask about Cabinet Refacing And Refinishing
Tell us about the project and how to reach you.